Short answer: make your YouTube banner 2560 × 1440 pixels (16:9), at least 2048 × 1152, and keep the file at 6 MB or smaller. Put every word and logo inside the safe area, 1235 × 338 pixels at the minimum size, in the middle of the image, because phones and computers crop everything around it.
Every screen shows a different part of the same banner. Below: the full spec, the safe area worked out at both sizes, what each device crops, how to change the banner, and how to make banners for many channels from one design.
YouTube banner size: the full spec
These figures come from YouTube Help's page on managing your channel branding, checked November 2026.
| Channel banner | |
|---|---|
| Recommended size | 2560 × 1440 px ("especially for TV") |
| Minimum size | 2048 × 1152 px |
| Aspect ratio | 16:9 |
| Safe area for text and logos | 1235 × 338 px, at the minimum size |
| Max file size | 6 MB |
| File types | JPEG or PNG (from the YouTube Data API; the Help page lists none) |
| Where it shows | Computer, mobile and TV, cropped differently on each |
YouTube adds two rules: the image should fill the whole screen on larger devices (it is cropped on others), and it should have no added shadows, borders or frames.
Help is silent on file types for the banner. YouTube's developer docs for uploading a banner through the Data API accept JPEG and PNG, so those are the safe choices.
The YouTube banner safe area
The safe area is the part of the banner that shows on every device. YouTube gives it as 1235 × 338 pixels at the minimum upload size of 2048 × 1152. That is about 60% of the width and 29% of the height.
YouTube does not draw the box or say where it sits. The crops it describes trim the image from the edges toward the middle, so treat it as a box centered both ways. Scaled to the recommended size, the same proportions give roughly 1546 × 423, the figure most older guides quote.
Here is where that box falls, in pixels from the top left:
| Banner size | Safe area | Left to right | Top to bottom |
|---|---|---|---|
| 2048 × 1152 | 1235 × 338 | 407 to 1641 | 407 to 745 |
| 2560 × 1440 | about 1546 × 423 | 507 to 2053 | 509 to 932 |
The 2560 row is our arithmetic on YouTube's numbers, not a YouTube figure. Leave a margin inside the box too, so the crop never lands right against your text.
How the banner shows on TV, desktop and mobile
YouTube uses one banner for all screens and shows a different slice of it on each:
- TV shows the whole 16:9 image as a background. This is why YouTube recommends 2560 × 1440 "especially for TV": it is the one place the full image is seen, and seen large.
- Computers show a wide, short strip across the top of the channel page: the full width or close to it, but only a thin band of the height.
- Phones and tablets show a narrower strip still, so the left and right sides go too.
The safe area is where those crops overlap. YouTube's older channel art guide listed a size per device; the current page only says the banner "shows differently depending on your device", so the safe area is the one number to design against. Treat the full canvas as background (a photo, texture or color that works on a TV) and put the message, logo and upload schedule in the safe area.
2560 × 1440 or 2048 × 1152?
Use 2560 × 1440 if you can. Both are 16:9, and both are accepted, but the bigger file looks sharper on a TV and on large desktop screens. The minimum, 2048 × 1152, is the floor YouTube gives for uploads, so don't go below it.
The size you can't use is anything that isn't 16:9. A square logo or a 3:1 header from another platform will not fill the frame, and cropping it to 16:9 in the upload preview throws away most of it.
YouTube channel art size: the other branding images
"Channel art" is the old name for the banner, and the same Help page covers the two other images a channel shows:
| Image | Size | File |
|---|---|---|
| Banner | 2560 × 1440 recommended, 2048 × 1152 minimum | 6 MB or smaller |
| Profile picture | Renders at 98 × 98 px | JPG, GIF, BMP or PNG, no animated GIFs, up to 15 MB |
| Video watermark | At least 150 × 150 px, square | Under 1 MB |
The profile picture is shown as a small circle, so upload a square that is much bigger than 98 pixels and keep the subject in the middle. The watermark is the small brand mark in the corner of your videos, and it is not available on videos set as made for kids.
For the images on your videos, see the YouTube thumbnail size guide.
File type and the 6 MB limit
A flat graphic (solid colors, type, a logo) saved as PNG at 2560 × 1440 is usually far below 6 MB. A detailed photo saved as PNG at that size can go over it. If yours does, save it as a high-quality JPEG, and keep PNG for crisp text and flat color. Don't shrink the pixels below 2048 × 1152 to get under the limit: that is YouTube's minimum.
Design tips for a banner that survives every crop
- Keep the message short. Channel name plus one line. The safe area is only about a third of the height, and on a phone it is shown small.
- Use big type. On a phone the banner is a few hundred pixels wide on screen, so a 40 pixel headline in a 2560 pixel file becomes tiny. Aim for a headline at least 120 pixels tall.
- Center the important part. Logos, faces and text go inside the safe area. Decoration can run to the edges.
- No frames or borders. YouTube asks you not to add them, and the crop would cut them off on most screens anyway.
- Check it on three screens: a computer, a phone and a TV app if you have one.
- Match your other profiles. A channel that shares a look with its X header and LinkedIn banner is easier to recognize. The Twitter header size guide and the LinkedIn banner size guide cover those shapes.
How to change your YouTube banner
On a computer:
- Sign in to YouTube Studio.
- In the left menu, select Customization, then Profile.
- Under the banner, click Change and pick your image. Adjust the crop in the preview, then click Done.
- Click Publish.
In the YouTube app on Android, tap your profile picture, then View channel, then the edit button, and tap the banner image to take or choose a photo. YouTube Help also covers the YouTube Studio app.
Official Artist Channels work a little differently: the banner above is used on computers and phones only, and the TV and YouTube Music banner is set separately in YouTube Studio under Profile.
Setting the banner from code
If you run many channels, YouTube's Data API can set a banner without opening Studio. It takes three steps: upload the image with channelBanners.insert (16:9, at least 2048 × 1152, up to 6 MB, JPEG or PNG), take the url it returns, then set it as the channel's banner with channels.update. Each upload costs 50 quota units.
Make YouTube banners at scale with bannx
One banner is easy. Twenty are not: a network with a channel per show, an agency with a client per channel, or a creator who changes the banner for every season or launch. That is the same design with different words, which is a template with variables.
In bannx you design the banner once. The editor's size picker has a YouTube channel banner preset at 2560 × 1440, and the parts that change (channel name, tagline, upload schedule, logo) become variables. Then each channel is one row in a spreadsheet:
id,channel,tagline,schedule,_size
build-room,The Build Room,Interviews with people who ship,New episodes every Tuesday,youtube-banner
build-room-x,The Build Room,Interviews with people who ship,New episodes every Tuesday,x-header
field-notes,Field Notes,Short guides for working designers,New videos every Friday,youtube-banner
Upload the CSV in the template's Bulk tab and you get a ZIP with one image per row, named by the id column. The optional _size column renders a row at another preset, so the same run can make a matching X / Twitter header (1500 × 500) for each channel. How the design adapts to the new shape depends on how it was built: layers pinned with constraints and auto-layout frames re-lay themselves out (reflow), and a design built at fixed positions can be scaled to fit instead (scale).
The same run works over the bulk API, up to 500 rows per request. An image costs 1 credit, and every account gets 100 free renders a month. Bulk runs (the Bulk tab and the bulk API) are on paid plans. The spreadsheet guide covers the column rules, and the Image Gen API page covers rendering from your own code. Pair a render with the Data API steps above and a banner can update itself.
Keep each channel's colors, fonts and logo in the brand library, so a new channel's banner picks up the right look from its brand instead of a copy of the file.
Start from a template
Templates are free to edit and download as PNG or PDF, with no account and no watermark. Open any design from the social media templates or the publishing templates, and on its page use Pick a size to choose YouTube channel banner. The preview re-renders at 2560 × 1440 and the download comes out at that size, while the template itself stays as it was.
Making a matching thumbnail for each video? The single-speaker podcast thumbnail template is a ready-made 16:9 design with the guest's name, photo and episode as variables.
FAQ
What is the YouTube banner size in 2026? 2560 × 1440 pixels at 16:9 is recommended, and 2048 × 1152 is the minimum YouTube accepts. The file must be 6 MB or smaller.
What is the YouTube banner safe area? 1235 × 338 pixels at the 2048 × 1152 minimum size, centered in the image. At 2560 × 1440 the same share of the image is about 1546 × 423 pixels. Keep text and logos inside it, because computers and phones crop everything else.
Why is my YouTube banner cut off? YouTube uses one banner for every screen and crops it differently on each. A TV shows the whole image, a computer shows a wide strip, and a phone shows a narrower strip. Only the safe area in the middle shows everywhere.
Is 2560 × 1440 the same as YouTube channel art size? Yes. "Channel art" is the older name for the channel banner, and the size has not changed: 2560 × 1440 recommended, 2048 × 1152 minimum, 16:9.
How do I change my YouTube banner? In YouTube Studio on a computer, go to Customization, then Profile, click Change under the banner, adjust the crop, click Done, then Publish. On Android, open your channel, tap edit and tap the banner.